MagazínJak natřít podlahu v garáži

Also in the workshop or garage needs a floor at least once in a while to get a new coat. Painted floor in the garage, then much better maintained, but also washes.

Also in the workshop or garage needs a floor at least once in a while to get a new coat. Painted floor in the garage, then much better maintained, but also washes.
 

 

To select a color

Paint concrete floors provide paint on concrete. There are many manufacturers and the choice is yours. The selection will advise you at the store staff if you need advice.
 
You can choose water-based and solvent paints. They are suitable for floors in the garage best. When properly applied, will last for several years. For garage choose colors that have been certified for contact with petroleum products. So does the destruction of paint in places where our floor were spilled oil or gasoline. Do not forget about the right color.
 

Floor coating step by step

The first floor is completely clean so that the substrate is dry and hard. In the case that the floor is very dirty, it is preferable to perform surface grinding machine. In places where the concrete is crumbling, use a primer, a small place then repaired leveling trowel. For larger holes, prepare a concrete mix, painted floors, however, begin only after the concrete will cure properly.
 
2. Thoroughly stir the paint, start with an even application of color on the floor. 1 liter paint can is sufficient according to the absorbency of about 11 m2.
 
3. Allow the first coat to dry properly, preferably overnight. Coat the floor for the second time, if necessary, a third time.
 
4. When the floor dries properly, release into the paint base, it is suitable for wall stick tape to the wall defaced 5-20 cm from the floor.
 
5. Roller Paint the space between the tape and the floor, then remove the tape. Do not wait until the paint dries, paint You could then cause damage.