MagazínLaying paving

Council laying paving

• Is needed before laying paving to make a thorough settlement of the subsoil. On how the foundation is ready, it depends on the life of pavements. First, start with the excavation, the underlying layer is then compacted, compared with the base of the trench. This can be done by machine or roller, or by using other methods. The depth of the trench depends on the thickness of the tiles.

• The next step is to deposit base layers. Beneath the pavement, which serves as a driveway, with stores mostly rubble. Under sidewalks are considered rubble, which is much finer.

• Fit the edge regarded areas. Curbs should reside in the concrete. It is necessary to distinguish between curbs for sidewalks, garden areas and depending on its land use.

• After going on curbs, start with sprinkles underlying pulp. Again it is necessary to compact the surface. Base layers are compacted three times, each separately. For bicycle paths and sidewalks is done only one base layer of a pulp and the surface is compacted only twice.

• Finally the prepared soil empties very fine gravel, sand accordingly. Sand is no longer considered a straight pavement. Paving is fundamentally not stored in concrete. Firstly it was no longer possible as needed to analyze and secondly would lose excellent leveling capability. It could also cemented pavement during the winter break.

• Paving begin to consider the lowest point of the reputed area. From there we proceed towards the highest. Paving we break only in exceptional cases. Among the various joints based paving needs to be done dusting fine quartz sand, then sweep off the excess. Individual parts of tiles must be dry.